DRUM CHARGE
SM 6-17 G065
Detailed
Descriptions
6.6 DRUM CHARGE
6.6.1 OVERVIEW
This machine uses a drum charge roller to charge the drum.
The drum charge roller [A] contacts the surface of the drum [B] to give it a negative
charge. The high voltage supply board [C] supplies a negative dc voltage to the
drum charge roller through the charge roller terminal [D], bias plate [E], and the
rear roller bushing [F] to give the drum surface a negative charge of –950V.
G065D525.WMF
[B]
[A]
[C]
[E][D][F]
To Next Page
Loading...
