PAPER FEED
G065 6-32 SM
6.9.2 PAPER FEED DRIVE
The feed/development motor [A]
drives the pick-up and feed
mechanism of both the upper and
second paper feed stations through
gears and the paper feed clutches
[B].
When the paper feed clutch turns on,
the pick-up roller, paper feed roller,
and separation roller start rotating to
feed the paper. The paper feed
clutch stays on until shortly after the
registration sensor [C] actuates.
6.9.3 PICK-UP/SEPARATION ROLLER RELEASE
When the paper tray [A] is not inside
the machine, the separation roller [B]
is away from the paper feed roller [C]
and the pick-up roller [D] stays in the
upper position.
When the paper tray is set into the
machine, it pushes the release lever
[E]. This causes the pick-up roller [D]
to go down and the separation roller
[B] to move up and contact the paper
feed roller.
G065D703.WMF
G065D704.WMF
G065D763.WMF
[A]
[C]
[A]
[B]
[C]
[E]
[D]
[B]
To Next Page
Loading...
