3000-SHEET FINISHER INSTALLATION (A697)
SM 1-15 G065
Installation
1.1.2 INSTALLATION PROCEDURE
!
CAUTION
Unplug the main machine power cord before starting the following
procedure.
NOTE: The bridge unit (B397) and paper tray unit (G520) must be installed before
installing this finisher.
If the mailbox (G909) will be installed, first install the mailbox, then the
bridge unit for the mailbox (G912), and finally install the finisher.
1. Unpack the finisher and remove the tapes.
A697I507.WMF
A697I506.WMF
To Next Page
Loading...
