ENERGY SAVER MODE
G065 6-56 SM
6.14 ENERGY SAVER MODE
If the printer remains idle for the selected time interval, the machine automatically
enters the energy saver mode and switches off the fusing lamps to reduce power
consumption.
The customer can select the idle time interval or switch the energy saver mode off.
The Energy Saver selector setting is in the System menu, which can be accessed
at the printer operation panel.
User Tool Settings
Energy Saver On/Off On (default)
E.Saver Time
1 minute (default), 5 minutes, 15 minutes, 30 minutes, 45
minutes, 60 minutes
• After the machine remains idle for the specified time, the CPU switches off the
fusing lamps.
• The machine leaves the energy saver mode and returns to normal operation
when any key on the operation panel is pressed, when the printer receives a
print job from the computer, or after the printer is switched off and on.
• The time from receiving the print start command to making the first print is longer
than when powering up from normal standby mode.
For details, see the Operating Instructions.
To Next Page
Loading...
Need help?
General
