MACHINE INSTALLATION
SM 1-3 G065
Installation
1.1.4 POWER REQUIREMENTS
!
CAUTION
1. Make sure the plug is firmly inserted in the outlet.
2. Connect the printer to an independent power source. Avoid connecting
the printer to a power supply shared with another machine.
3. Always ground the machine.
1. Input voltage level: 120 V, 60 Hz: More than 12 A
220 V ~ 240 V, 50 Hz/60 Hz: More than 8 A
2. Permissible voltage fluctuation: ±10%
3. Do not set anything on the power cord.
1.2 MACHINE INSTALLATION
Refer to the Operating Instructions for details.
1.3 OPTIONAL UNIT INSTALLATION
The following options are available for this machine. Refer to the Operating
Instructions for how to install these options.
• PTU (Paper Tray Unit)
• 64/128/256 MB DIMMs
• HDD (Hard Disk)
• IEEE 1394
1.4 SYMBOLS USED IN TEXT
Screw: ! Connector: "
To Next Page
Loading...
