SERVICE CALL CONDITIONS
G065 4-14 SM
SC Level Symptom Possible Cause
Software write parameter setting
error
986 C
An unstable area at the storage
destination in the settings table is set
NULL for the parameter received by
the write module.
•
Software defective
Software performance error990 B
The software attempted to perform
an unexpected operation.
•
Software defective
•
Internal parameter incorrect
•
Insufficient working memory
•
When this SC occurs, the file
name, address, and data will be
stored in NVRAM. Note the above
data and the situation in which this
SC occurs. Report this information
to the technical control center.
Software continuity error991 D
The software attempted to perform
and unexpected operation. Unlike
SC990, continuity of the software is
the problem.
•
Software bug
•
Internal parameter incorrect
•
Insufficient working memory
To Next Page
Loading...
