PRINTER ENGINE SERVICE MODE
G065 5-32 SM
Reading
Number Bit Description
01
7 Fusing Exit Sensor Activated Deactivated
6 Paper Height Sensor 2 Activated Deactivated
5 Paper Height Sensor 1 Activated Deactivated
4 Not used — —
3 Paper Size Sensor 4 Activated Deactivated
2 Paper Size Sensor 3 Activated Deactivated
1 Paper Size Sensor 2 Activated Deactivated
SP5803-001
Paper Feed 1
(Upper Tray)
0 Paper Size Sensor 1 Activated Deactivated
7 Duplex Unit Set Sensor Unit set Unit not set
6 Paper Height Sensor 2 Activated Deactivated
5 Paper Height Sensor 1 Activated Deactivated
4 Not used — —
3 Paper Size Sensor 4 Activated Deactivated
2 Paper Size Sensor 3 Activated Deactivated
1 Paper Size Sensor 2 Activated Deactivated
SP5803-002
Paper Feed 2
(Lower Tray)
0 Paper Size Sensor 1 Activated Deactivated
7 Zero Cross Signal Detected Not detected
6
Transfer Belt Position
Sensor
Not present Present
5 Exhaust Fan Lock Signal Not locked Locked
4 Cooling Fan Lock Signal Not locked Locked
3 Main Motor Lock Signal Not locked Locked
2 Toner Overflow Sensor Tank not full Tank full
1 Cover Open Cover closed Cover opened
SP5803-003
Regist/Others
0 Registration Sensor Paper detected Paper not detected
7 Duplex reverse path door Closed Open
6 Paper End Sensor Paper detected Paper not detected
5 Not used — —
4
Paper Size Sensor 4,
By-pass
Activated Deactivated
3
Paper Size Sensor 3,
By-pass
Activated Deactivated
2
Paper Size Sensor 2,
By-pass
Activated Deactivated
1
Paper Size Sensor 1,
By-pass
Activated Deactivated
SP5803-004
By-pass Feed
0 Unit Set Signal Yes No
7 Not used Yes No
6 Unit Set Signal Connected Not connected
5 Paper Sensor Paper detected Paper not detected
4 Relay Sensor Paper detected Paper not detected
3 Exit Sensor Paper detected Paper not detected
2
Left Cover Switch Switch pressed
(cover closed)
Switch not pressed
1
Middle Cover Switch
Switch pressed
(cover closed)
Switch not pressed
SP5803-005
Relay Unit
(Bridge Unit)
0
Right Cover Switch Switch pressed
(cover closed)
Switch not pressed
To Next Page
Loading...
