PM TABLES
G065 2-2 SM
EM 150K 300K 450K NOTE
PAPER FEED
Registration Roller CCCCWater or alcohol.
Paper Feed Roller* I R R R
Separation Roller* I R R R
Pick-up Roller* I R R R
Paper Feed Roller
(By-pass feed table)*
I RRR
Separation Roller
(By-pass feed table)*
I RRR
Pick-up Roller
(By-pass feed table)
I RRR
Check counter value for each
(SP7204). If ≥ 150 K, replace
roller. After replacing the roller,
do SP7816 to reset counter.
Paper Feed Guides C C C Water or alcohol.
Relay Rollers C C C Water or alcohol.
Bottom Plate Pad C C C Water or alcohol.
Bottom Plate Pad
(By-pass feed)
CCC
Water or alcohol.
Registration Sensor C C C Blower brush
Paper Feed Roller Gear
(By-pass feed)
LLL
Silicone Grease G-501.*
DUPLEX UNIT
Upper Transport Roller C C C Water or alcohol.
Lower Transport Roller C C C Water or alcohol.
TRANSFER BELT UNIT
Transfer Belt* CRRRDry cloth
Transfer Belt Cleaning
Blade*
RRR
Transfer Belt Rollers C C C Dry cloth
Entrance Seal C C C Dry cloth
Transfer Entrance GuideCCCCDry cloth
Used Toner Tank I C C C Empty the tank.
FUSING UNIT/PAPER EXIT
Fusing Entrance and Exit
Guide Plates
CCC
Water or alcohol.
Hot Roller* R R R
Pressure Roller* R R R
Fusing Thermistors* R R R
Cleaning Roller C C C Water or alcohol.
Cleaning Roller Bushings L L L Grease: Barrierta JFE 55/2
Hot Roller Strippers* C R C Water or alcohol.
Paper Exit Guide Ribs C C C Water or alcohol.
Exit Sensor C C C Blower brush
DRIVE
Drive Belts I Replace if necessary