Message Cause Solution and reference
"All the remaining
print volume has
been allocated to
another central
managed client(s).
The job has been
cancelled."
The job was
canceled because
the usage count
information could
not be obtained
from the Central
Management
machine.
All job slots are occupied by other devices. Check the
status of the client machine.
"An error occurred
while printing a job
with Background
Numbering. The
job has been
cancelled."
A size that is
impossible to print
was specified.
Specify a size smaller than 215.9 mm (8.5 inches) wide
and 355.6 mm (14.0 inches) long in "Print On:" in the
printer driver. When [Same as Original Size] is specified
in "Print On:", reduce the size specified in "Print On:" or
adjust the size in the application.
"An error occurred
while processing
an Unauthorized
Copy Prevention
job. The job was
cancelled."
The settings in the
printer driver are
incorrect.
Check the following in the printer driver:
• Is a value smaller than 600 dpi specified in
[Resolution]?
See "Applying Different Print Settings Depending on
the Document Type", User Guide (Full Version).
• Is only space(s) entered as the text to use for the
background pattern in the unauthorized copy
prevention function?
• Is Document Server specified as the print method?
See "Storing Documents to Print in the Machine",
User Guide (Full Version).
Unauthorized
copy prevention is
given priority in
[Settings for
Administrator].
Consult the device administrator for the settings of the
machine. The machine administrator can change the
setting in [Settings] [System Settings] [Settings for
Administrator] [Security Pattern/Stamp]
[Unauthorized Copy Prevention Printing: Printer].
See "Data Management/Maintenance", User Guide (Full
Version).
When a Message Appears While Using the Printer Function
279
To Next Page
Loading...
