Ricoh Pro 8310 - Perfect Binder: Slave-To-Cutter Control Board Communication Error 1; Perfect Binder: Slave-To-Cutter Control Board Communication Error 2; Sc750-13; Sc750-14

1.SC Codes
318
Major Cause
 Master control board is defective.
 Connector loose, damaged, or defective.
Solution
 Reconnect the connector.
 Replace the relay board.
 Replace the master control board.
 Replace the harness.
SC750-13
Error Name
Perfect Binder: Slave-to-Cutter Control Board Communication Error 1
Pattern
D
Error Condition
Slave control board could not communicate with the cutter control board (communication alarm for over
5 sec.).
Major Cause
 Slave Control Board defective
 Cutter control board defective
 Connector loose, damaged, or defective.
Solution
 Reconnect the connector.
 Replace the slave control board.
 Replace the cutter control board.
 Replace the harness.
SC750-14
Error Name
Perfect Binder: Slave-to-Cutter Control Board Communication Error 2
Pattern
D