Ricoh Pro 8310 - A4 Lct; A3 Lct

3.Paper Delivery Problems
716
A4 LCT/ A3 LCT
Cause
Paper dust adheres to the surfaces of the rollers in the LCIT paper feed units, the rollers become
smooth, and then slip on the surface of the paper. The paper fails to feed out of the paper tray.
Solution
Three rollers can be replaced with EPDM rollers to improve feed performance. If the customer is using
paper with a high ash content, replace the pick-up roller, feed roller, and separation roller in the paper
feed units.
Description
Q'ty
Pick-up roller
1
Feed roller
1
Separation roller
1
The photo shows the configuration of the rollers in each paper feed unit. Three rollers need to be
replaced:
No.
Roller
Comment
[A]
Pick-up roller
Replace with EPDM pick-up roller
[B]
Feed roller
Replace with EPDM feed roller
[C]
Reverse (separation) roller
Replace with EPDM separation roller