Ricoh Pro 8310 - Sc754-81; Sc754-82

1.SC Codes
555
Solution
 Reconnect the connector.
 Replace the upper tray lift motor.
 Replace the upper tray PICK sensor
 Replace the inserter control board.
 Replace the motor harness.
 Replace the sensor harness.
After the repairs, cancel the low performance mode, and then turn the power off/on.
SC754-81
Error Name
Perfect Binder: Lower Tray Low Position Lag Error
Pattern
B
Error Condition
The lower tray did not leave the low limit sensor after the lower tray lift motor had operated for 5 s.
Major Cause
 Lower tray lift motor defective
 Upper tray low limit sensor defective
 Connector loose, damaged, or defective
 Inserter control board defective
Solution
 Reconnect the connector.
 Replace the lower tray lift motor.
 Replace the upper tray low limit sensor
 Replace the inserter control board.
 Replace the motor harness.
 Replace the sensor harness.
After the repairs, cancel the low performance mode, and then turn the power off/on.
SC754-82
Error Name
Perfect Binder: Lower Tray Paper Feed Position Late Error