How to Read This Manual
Symbols
This manual uses the following symbols:
Indicates points to pay attention to when using the machine, and explanations of likely causes of paper
misfeeds, damage to originals, or loss of data. Be sure to read these explanations.
Indicates supplementary explanations of the machine's functions, and instructions on resolving user errors.
This symbol is located at the end of sections. It indicates where you can find further relevant information.
[ ]
Indicates the names of keys on the machine's display or control panels.
Names of Major Items
Major items of this machine are referred to as follows in this manual:
• A3/11"×17" Tray Unit TK5000 (optional) A3/11" × 17" tray unit
• Bridge Unit BU5000 (optional) Bridge unit
• Buffer Pass Unit Type 5000 (optional) Buffer pass unit
• Cover Interposer Tray CI5010 (optional) Interposer
• High Capacity Stacker SK5010 (optional) Stacker
• LCIT RT5030 (optional) Large Capacity Tray (LCT)
• LCIT RT5050 (optional) Wide Large Capacity Tray (Wide LCT)
• Multi Bypass Tray BY5000 (optional) Multi bypass tray (Tray 7)
• Perfect Binder GB5000 (optional) Perfect binder
• Ring Binder RB5000 (optional) Ring binder
• Roll-Away Cart Type 5010 (optional) Stacker tray
• Tab Sheet Holder Type3260 (optional) Tab sheet holder
• Trimmer Unit TR5020 (optional) Trimmer
• Z-folding Unit ZF4000 (optional) Z-folding unit
8
To Next Page
Loading...
