Ricoh pro c901 - Checking Machine Status and Settings

Checking Machine Status and Settings
This section describes how to check the machine's system status.
Maintenance Info
You can check the following items under [Maintenance Info]:
• [Remaining Toner]
Displays the amount of remaining toner.
• [No Staples]
Displays whether there are staples remaining.
• [Waste Staple Receptcl Full]
Displays whether the waste staple receptacle is full.
• [Punch Receptacle Full]
Displays whether the hole punch receptacle is full.
• [Paper Tray]
Displays the paper type and size loaded in the paper trays.
• [No Binding Ring Combs]
Displays whether there are binding ring combs remaining.
• [Output Tray Full]
Displays whether the output tray is overloaded.
• [Paper Misfeed]
Displays state of and solutions for paper misfeeds.
• [Cover Open]
Indicates the cover that is open.
• [Comb Punch Receptcl Full]
Displays whether the comb punch waste receptacle is full.
• [Waste Paper Receptcl Full]
Displays whether the waste paper receptacle is full.
Machine Address Info
You can check the following items under [Machine Address Info]:
• [Machine IPv4 Address]
Displays the machine's IPv4 address.
• [Machine IPv6 Address]
Displays the machine's IPv6 address.
1. When the Machine Does Not Operate As Wanted
16
1