Ricoh pro c901 - When Rb10 - Rb17 Is Displayed; When Rt1 or Rt2 Is Displayed

When Rb10 - Rb17 Is Displayed
CAL019
Raise lever Rb17,
and then remove
misfed paper.
Return the staple
unit to its original
position, and then
close the front cover
of the Booklet Finisher
SR5020 .
Lower lever
Rb15, and then
turn knob Rb16.
Pull handle Rb12,
and then pull out
the staple unit.
Raise lever Rb13,
and then remove
misfed paper.
Turn knob Rb14,
and then remove
misfed paper.
Return lever Rb13
to its original
position.
Return lever Rb17
to its original
position.
Remove misfed
paper.
Open the front cover
of the Booklet Finisher
SR5020.
Turn knob Rb10.
Turn knob Rb11
9 to 11 times.
When Rt1 or Rt2 Is Displayed
Turn lever Rt1 to
the right, and then
remove misfed
paper.
Hold down lever
Rt2, and then
remove misfed
paper.
Return lever Rt2 to
its original position.
Close the trimmer
front cover.
CAL013
Open the trimmer
front cover.
Remove misfed
paper from the
trimmer tray.
Removing Jammed Paper
107
3