2. Fasten the end fence using the screw provided.
• When loading index tabs, shift the end fence for A4 , 8
1
/
2
" × 11" to position before setting
the end fence for index tabs.
Changing the Paper Size in the Wide Large Capacity Tray
This section explains how to change the paper size in the Wide LCT.
• If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side
fences may slip out of place.
• Check that the paper edges are aligned with the left side.
• Do not stack paper over the limit mark.
1. Carefully pull out the paper tray until it stops.
1. Paper transfer unit
Do not open the paper transfer unit when the paper tray is in use, or a misfeed might occur.
2. Adding Paper, Toner, Staples, Rings and Glue
66
To Next Page
Loading...
