Ricoh pro c901 - Booklet Finisher SR5020 (Saddle Stitch)

CAL004
Open the finisher
front cover.
Pull handle Rb18,
and then pull out
the staple unit.
Turn knob Rb19
counterclockwise
to rotate the staple unit.
Pull out the cartridge
lever.
Return the staple unit
to its original position.
Push in the cartridge
until it clicks.
Pull out the cartridge
gently.
Remove the empty
refill in the direction
of the arrow.
Push the new refill
into the cartridge until
it clicks.
Hold the lever, and
then push in the
cartridge.
Close the finisher
front cover.
Booklet Finisher SR5020 (Saddle Stitch)
This section describes how to add staples to Booklet Finisher SR5020 (saddle stitch).
2. Adding Paper, Toner, Staples, Rings and Glue
76
2