Ricoh pro c901 - When N1 Is Displayed; When N2 or N3 Is Displayed

When N1 Is Displayed
CAL122
Raise lever N1.
Open the Z-folding
unit upper cover.
Remove misfed
paper.
Lower lever N1,
and then close the
Z-folding unit upper cover.
When N2 or N3 Is Displayed
CAL123
Remove misfed
paper, and then
close the N3 cover.
Remove misfed
paper, and then
close the N2 cover.
Raise lever N1.
Open the Z-folding
unit upper cover.
Pull out the Z-folding
unit.
Open the N2 cover.
If you cannot remove
misfed paper, open
the N3 cover.
Return the Z-folding
unit to its original
position.
Lower lever N1,
and then close the
Z-folding unit upper cover.
Removing Jammed Paper
101
3