Ricoh pro c901 - Loading Paper into the A3;11 × 17 Tray Unit

1. Carefully pull out the paper tray until it stops.
CAL066
2. Square the paper, and then place it print side down.
• Whole tray pulled out
CAL040
• Left half of the tray pulled out
CAL041
3. Carefully push the paper tray fully in.
Loading Paper into the A3/11" × 17" Tray Unit
This section describes how to load paper in the A3/11" × 17" tray unit.
2. Adding Paper, Toner, Staples, Rings and Glue
40
2