Ricoh pro c901 - When Mc7 or Mc8 Is Displayed; When Mk1 or Mk2 Is Displayed

When Mc7 or Mc8 Is Displayed
CAL011
Remove misfed
paper.
Remove the unit
fully by pulling on
handle Mc8.
Open the ring binder
front right cover.
Pull down lever
Mc7.
Return the unit to its
original position.
Return lever Mc7 to
its original position.
Remove any bound
booklets that are
inside the machine.
Close the ring binder
front right cover.
Remove any jammed
bound booklets from
the paper exit.
When Mk1 or Mk2 Is Displayed
Open the Mk2 cover,
and then remove
misfed paper.
Remove paper if the
display reports a
paper misfeed in Mk3 - Mk5.
CAL012
Open the interposer
of the perfect binder
and Mk1 covers.
Close the Mk2 and Mk1
covers.
Close the interposer
of the perfect binder .
3. Clearing Misfeeds
96
3