• You can suspend printing only when the finisher's shift tray is selected as the output tray.
Booklet Finisher SR5020
This section describes how to suspend a large print job when using the Booklet Finisher SR5020.
1. Press the [Suspend/Resume] key.
The key lights up.
2. Remove the stack of paper from the finisher shift tray.
3. Press the [Suspend/Resume] key.
The key light turns off and printing restarts.
• You can suspend printing only when the finisher's shift tray is selected as the output tray.
Pausing Print When Using Finisher SR5000 or Booklet Finisher SR5020
33
To Next Page
Loading...
