Adding Staples
This section describes what to do when staples need replacing.
• Keep your hands clear of the booklet finisher tray when removing misfed paper, pulling out or
pushing in the finisher's staple unit. You can trap and injure your fingers if you do not.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.
• If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the
staples, and do not add more.
• Refill the stapler according to the finisher type. Check the type if you are unsure. For details about the
type of finisher, see "Appendix", About This Machine.
Finisher SR5000
This section describes how to add staples to Finisher SR5000.
2. Adding Paper, Toner, Staples, Rings and Glue
74
To Next Page
Loading...
