Ricoh pro c901 - When R4 - R8 Is Displayed

When R4 - R8 Is Displayed
CAL016
If you cannot
remove misfed paper,
raise lever R7.
Pull handle R8,
and then pull out the
staple unit.
Remove misfed
paper, and then
return lever R7 to its
original position.
Remove misfed
paper.
Remove misfed
paper.
If you cannot
remove misfed paper,
pull lever R6.
Remove misfed
paper.
Remove misfed
paper.
Open the front cover
of the Finisher SR5000.
Lower lever R4 to
the left.
Lower lever R5 to
the left.
Return levers R6,
R5, and R4 to their
original positions.
Return the staple unit
to its original position,
and then close the front
cover of the Finisher SR5000.
3. Clearing Misfeeds
104
3