Ricoh pro c901 - Pausing Print When Using Finisher SR5000 or Booklet Finisher SR5020; Finisher SR5000

Pausing Print When Using Finisher SR5000 or
Booklet Finisher SR5020
This section describes how to suspend a large print job when using the Finisher SR5000 or Booklet Finisher
SR5020.
Depending on the image you are printing, prints might not stack properly. If this happens, suspend the job,
remove the prints and then restart the job.
Finisher SR5000
This section describes how to suspend a large print job when using the Finisher SR5000.
1. Press the [Suspend/Resume] key.
The key lights up.
CAL039
2. Remove the stack of paper from the finisher shift tray.
CAL070
3. Press the [Suspend/Resume] key.
The key light turns off and printing restarts.
1. When the Machine Does Not Operate As Wanted
32
1