Ricoh pro c901 - When U7 - U9 Is Displayed (When the Wide Large Capacity Tray Is Installed); When V Is Displayed

When U7 - U9 Is Displayed (when the Wide Large Capacity Tray is installed)
CAL023
Open the Wide LCT front
left cover.
Hold down lever U8, and
then turn knob U5.
Turn knob U9, and then
remove misfed paper.
Return lever U8 to its
original position.
Open the paper transfer unit
cover, and then remove
misfed paper.
Return the paper transfer unit
cover and paper transfer unit to
their original positions.
Close the covers.
Pull out the paper transfer
unit.
Turn knob U7, and then
remove misfed paper.
When V Is Displayed
CAL124
Disconnect the multi
bypass tray.
Remove misfed paper.
Return the multi bypass
tray to its original position.
3. Clearing Misfeeds
110
3