Removing Staple Waste
This section describes how to remove staple waste.
• While " Waste Staple Receptacle is full." is displayed, you cannot use the staple function.
• " Waste Staple Receptacle is full." is displayed until the staple waste box is reinstalled.
• If the message is still displayed, reinstall the staple waste box.
Finisher SR5000
This section describes how to remove staple waste from Finisher SR5000.
CAL134
Open the finisher front
cover.
Pull out the staple
waste box.
Remove staple waste.
Reinstall the staple
waste box.
Close the finisher front
cover.
Booklet Finisher SR5020
This section describes how to remove staple waste from Booklet Finisher SR5020.
CAL135
Open the finisher front
cover.
Pull out the staple
waste box.
Remove staple waste.
Reinstall the staple
waste box.
Close the finisher front
cover.
Removing Staple Waste
119
To Next Page
Loading...
