Inserting Pages into an Existing Ring Bound
Booklet
This section describes how to insert pages into an existing ring bound booklet.
To insert new pages into a ring bound booklet, perform the following procedure.
• When binding paper manually with the ring opener, take care not to trap or injure your fingers.
You can use the ring stand and ring opener to insert new pages into the existing ring bound booklets. Use
these devices when you need to insert covers, replace existing pages, or add new pages.
1. Ring stand
2. Ring opener
1. Punch holes into the pages that you want to insert into the ring bound booklet.
2. With the ring bound booklet closed, place the ring comb on the ring stand so that each of
the rings is in a groove on the stand.
2. Adding Paper, Toner, Staples, Rings and Glue
82
To Next Page
Loading...
