3. Insert the spine of the ring comb into the fixing lug of the ring stand. Gently press down on
the ring comb to lock it into place.
4. Open the bound booklet to where you want to insert the new pages, and then place one of
your hands on the ring stand.
5. Insert the sharp end of the ring opener into one end of the ring comb, and then push it all
the way through the ring comb.
The rings of the comb will open as you push the ring opener through them.
6. Insert the new pages.
Inserting Pages into an Existing Ring Bound Booklet
83
To Next Page
Loading...
