Ricoh pro c901 - Booklet Finisher SR5020

Pull out the cartridge
gently.
CAL129
Return the staple unit
to its original position,
and then close the
finisher front cover.
Remove jammed
staples.
Hold the lever,
and then push in
the cartridge.
Pull down the face
plate until it clicks.
Push the cartridge
until it clicks.
Open the finisher
front cover.
Pull out the staple
unit.
Open the face plate
of the cartridge.
Turn knob R10
counterclockwise to
rotate the staple unit.
Pull out the cartridge
lever.
Booklet Finisher SR5020
This section describes how to remove jammed staples from Booklet Finisher SR5020.
Removing Jammed Staples
113
3