Ricoh pro c901 - When Large Size Paper Is Not Properly Aligned; Finisher SR5000

When Large Size Paper Is Not Properly Aligned
This section describes what to do if paper larger than B4 JIS or 8
1
/
2
" × 14" is not properly aligned or falls
from the finisher shift tray.
Finisher SR5000
This section describes what to do if paper larger than B4 JIS or 8
1
/
2
" × 14" is not properly aligned or falls
from the finisher shift tray when using Finisher SR5000.
1. Press the [Suspend/Resume] key.
The key lights up.
CAL039
2. Remove the prints.
3. Pull out the finisher shift tray's extension.
CAL075
4. Set the auxiliary paper tray.
Attach the auxiliary paper tray by aligning the two protrusions on its underside with the holes on the
tray extension.
1. When the Machine Does Not Operate As Wanted
36
1