Ricoh pro c901 - 1 When the Machine Does Not Operate as Wanted; Indicators

1. When the Machine Does Not Operate
As Wanted
This chapter describes basic troubleshooting procedures.
Indicators
This section describes indicators that appear on the display panel when the machine requires the user to
clear misfeeds, add paper, or perform other troubleshooting procedures.
Display Panel Indicator
Indicator Status
: Misfeed indicator Appears when a misfeed occurs.
For details, see p.85 "Removing Jammed Paper".
: Load Paper indicator Appears when paper runs out.
For details, see p.39 "Loading Paper".
: Add Toner indicator Appears when toner runs out.
For details, see p.71 "Adding Toner".
: Add Staple indicator Appears when staples run out.
For details, see p.74 "Adding Staples".
: Waste Toner Full indicator Appears when the waste toner bottle is full.
Contact your service representative.
: Empty Hole Punch Receptacle
indicator
Appears when the hole punch receptacle is full.
For details, see p.117 "Removing Punch Waste".
: Empty Waste Staple Receptacle
indicator
Appears when the waste staple receptacle is full.
For details, see p.119 "Removing Staple Waste".
: Service Call indicator Appears when the machine is malfunctioning or requires
maintenance.
: Open Cover indicator Appears when one or more covers of the machine are
open.
11
1