Replacing Ring Combs
This section describes how to replace ring combs.
• Keep your hands clear of the inside of the ring binder and the space under the ring binder tray.
You can trap your fingers if you do not.
• Use of non-recommended ring combs and/or ring comb cartridges can result in binding failures and
comb jams.
Open the cartridge
cover.
Pull out the ring
comb cartridge.
Insert the ring comb
package into the
cartridge.
CAL006
Tear the tab along
the perforated line,
and then remove it.
Pull the tab at the base of the package
towards you, and then pull it down.
Open the ring binder
front right cover.
Remove the
package.
Push in the cartridge,
and then close the
cartridge cover.
Close the ring
binder front right
cover.
• Add new ring combs to the cartridge only when the "Out of binding ring combs. Add binding ring
combs." message appears on the display panel.
2. Adding Paper, Toner, Staples, Rings and Glue
78
To Next Page
Loading...
