Paper Orientation
Tray 1, 2
LCT (Tray 3 - 5)
Wide LCT (Tray 3 - 6)
Multi Bypass Tray (Tray 7)
Paper
orientation:
Paper
orientation:
• Press the [Paper Setting] key, and specify "Letterhead" for the [Paper Type] setting of the paper tray
you want to use.
Loading Envelopes
This section describes how to load envelopes.
To load envelopes in Tray 2, place them with the side you want to print face-down. Be sure to unfold the
flaps and position them opposite to the paper feed direction.
To load envelopes in the Wide LCT or the multi bypass tray, place them with the side you want to print
face-up. Be sure to unfold the flaps and position them opposite to the paper feed direction.
• Wide LCT
2. Adding Paper, Toner, Staples, Rings and Glue
58
To Next Page
Loading...
