7. Holding the sides of the ring opener, carefully press down the opened rings.
To close a 100-sheet type binding ring comb, use the side of the ring opener that has the smaller
grooves.
To close a 50-sheet type binding ring comb, use the side of the ring opener that has the larger grooves.
The rings of the comb will close as you press down with the ring opener.
8. Remove the ring comb from the ring stand.
• When using the ring opener, take care to avoid injuring self or others and damaging nearby
equipment.
2. Adding Paper, Toner, Staples, Rings and Glue
84
To Next Page
Loading...
