• When two Wide LCTs are installed, the multi bypass tray cannot be installed on the second Wide
LCT.
• Check that the paper edges are aligned at the left side.
• The maximum number of sheets you can load into the multi bypass tray depends on paper type. The
number should not exceed the upper limit.
• The tray can hold up to 550 sheets in the multi bypass tray. Do not stack paper over the limit mark.
1. Place paper in the multi bypass tray.
When loading paper larger than A4 / 8
1
/
2
" × 11" , draw out the paper extender.
Place paper with print side up.
2. Set the side fences to the paper size.
3. Set the end fence.
Slide it to the right to remove the end fence.
Loading Paper
49
To Next Page
Loading...
