Ricoh pro c901 - Text Input and Editing; Available Characters and Input Keys

• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size
not being correctly detected or paper jams.
• When using the Z-fold function, the paper in the interposer must be of the same size as the prints after
they have been Z-folded. If the paper in the interposer is larger than the Z-folded sheets, a misfeed
might occur.
• Each tray can hold up to 200 sheets of paper. Do not stack paper over the limit mark.
• Do not use paper that has already been printed onto by this machine.
1. While pressing the release lever, align the side fences with the paper size to be loaded.
CAL048
2. Load paper orderly. Tightly fit the side fences to the loaded paper.
Place paper face up.
CAL049
When loading paper larger than A4 or 8
1
/
2
" × 11" , draw out the paper extender.
• If you load paper that cannot be automatically detected, specify its size using the display panel. For
details, see "Changing to a Size That Is Not Automatically Detected".
• p.69 "Changing to a Size That Is Not Automatically Detected"
Loading Paper
51
2