• You cannot perfect bind a booklet if the thickness of the book block's spine exceeds 23 mm (0.9
inches).
Orientation and binding position of covers and originals
This section explains the orientation and binding positions of covers and originals.
Place covers and originals in the orientation in which they are read.
• Depending on your machine, the procedure for selecting the orientation of covers and originals might
be slightly different. For details, refer to the procedure for your machine.
Loading cover sheets
This section describes how to load cover sheets into the interposer of the perfect binder.
• Load paper in the orientation.
• Do not place anything on top of or leave documents on the sensor. This may lead to the paper size
not being correctly detected or paper jams.
Loading Paper
53
To Next Page
Loading...
