Edit Auto Discovery Range
87
7
Edit Auto Discovery Range
Common to the “E-mail (SMTP)” and “Internet encryption
communication (HTTPS)” Method
Set the range of devices on the network to use Auto Discovery. Click [Auto Dis-
covery] - [Edit Auto Discovery Range] to show the screen.
†: Confirmation Only ❍: Able to Click/Change
Items Descriptions Admin Registrant
Total Shows the total of the registered Range. † †
Range The network address to use Auto Discov-
ery. Enter the IP address in “x.x.x.x” for-
mat (“x” stands for a number from 0 to
255).
❍❍
Subnet Mask The subnet mask to determine the enable
range for the Range. Enter the subnet
mask in “x.x.x.x” format (“x” stands for a
number from 0 to 255).
❍❍
Discovery Select to set Auto Discovery enable for
the device or not.
❍❍
Range Name The network address name entered for
the IP address in [Range].
❍❍
Comment You can enter comments for each [Range]
within 61 characters.
❍❍
Add(button) Adds new [Range].
[Add Auto Discovery Range] appears when
you click [Add]. See p.88 “Add Auto Dis-
covery Range” for details.
❍❍
Delete(button) Deletes [Range].
[Delete Auto Discovery Range] appears
when you click [Delete]. Seep.89 “Delete
Auto Discovery Range” for details.
❍❍
To Next Page
Loading...