About the Remote Communication Gate
6
1
7. Image I/O Devices Registered
without the Network
Regarding the digital MFPs and copy
machines unconnected to the Network,
you can control them by directly connect-
ing to this equipment using the RS-485
modular cable (black). The image I/O de-
vices on the Network can also be con-
trolled by the modular cable connection
for more detailed services. (For the devic-
es unconnected to the Network, howev-
er, you cannot use the Auto Discovery).
A total of 5 devices can be connected to
the Network. There are some devices,
however, that cannot be connected with
the modular cable. Please contact your
maintenance service representative and
ask about the compliant devices. The ac-
tual connection operation is to be con-
ducted by your service representative.
To Next Page
Loading...