EasyManua.ls Logo

Ricoh Remote Communication Gate - Details

Ricoh Remote Communication Gate
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network
77
7
†: Confirmation Only : Able to click/change
*1
This item will be shown with the optional wireless LAN card for Type BN1.
Wireless LAN
*1
Wireless LAN sig-
nal
*1
This shows the conditions of the
wireless LAN signals.
Good: –40dBm or more
Fair: from –80 to –61dBm
Poor: from –100 to –81dBm
Unavailable: –101dBm or under
††
Check Wireless
LAN Signal
(button)
*1
Refreshes [Wireless LAN signal].
❍❍
DNS Server Main DNS server Enter the IP address of the DNS serv-
er which the equipment mainly uses.
Enter the IP address in “x.x.x.x” for-
mat (“x” stands for a number from 0
to 255).
This is not required when you enter
the proxy server or SMTP server by
its IP address and not by its name.
❍❍
Sub DNS server Enter the IP address of the Sub DNS
server, if you have a secondary DNS
server, a server to use where the [Main
DNS server] cannot be used for some
reason. Enter the IP address in
“x.x.x.x” format (“x” stands for a
number from 0 to 255).
❍❍
Groups Items Descriptions Admin
Regis-
trant

Table of Contents