3. Press the Destination key to specify a destination.
4. Specify the next destination.
To add another folder destination, press the next Destination key.
Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-
mail, and folder.
5. Press the [Start] key.
The machine starts to scan the original and stores it in memory. When scanning ends, the
Communicating indicator lights and transmission starts.
• Folder transmission is performed using Memory Transmission, which automatically starts
transmission after storing documents in memory. If you switch the type of transmission to folder
while the machine is in Immediate Transmission mode, the transmission mode is automatically
switched to Memory Transmission.
• For details about canceling a transmission, see “Canceling a Transmission”.
• The Facsimile Features menu includes a user parameter setting (switch 17, bit 2) that enables you
to configure the machine to force the user to press [Add] whenever s/he specifies a destination
using a destination key. This prevents users accidentally sending documents to the wrong
destination. See “Parameter Settings”.
• For details about a folder destination, see “Folder Transmission”.
1. Transmission
100
To Next Page
Loading...
Need help?
General
