Ricoh SP 5200S User Manual

1. Press the transmission type tab to switch the transmission type to fax/IP-Fax, Internet
Fax, e-mail, or folder.
2. Press [Reg. No.].
The registration number entry display appears.
3. Enter a registration number using the number keys, and then press [ ].
While usually a registration number is displayed in the five-digit format, you do not need to enter
the first zeros of a registration number.
If you make a mistake, press [Clear] before pressing [ ], and then try again.
4. Press [OK].
The corresponding destination appears.
1. Transmission
134
1

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm