Ricoh SP 5200S User Manual

5. Select the destination of notification, and then press [OK].
If you make a mistake, before pressing [OK], press [Clear] or press the selected Destination key
again to turn the highlight off.
[E-mail TX Results] gets highlighted and the destination of notification selected appears.
6. Press [OK].
The standby display appears.
To check the settings, press [TX Mode].
7. Specify a destination, and then press the [Start] key.
• You can program one of the Quick Operation keys with operations for this function. Using the
Quick Operation Key allows you to omit steps 3 and 6. For details about Quick Operation Key,
see “General Settings”.
• p.140 "Sender Settings"
• p.335 "General Settings"
Confirming Transmission Results by E-mail
173
2

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm