• To use this function, all pages of the received document must be of the same size-inform the
sending party of this beforehand if necessary. You must also have paper set in the machine of the
same size as that sent by the sending party. In Two-Sided Printing, this machine will correctly
receive in A4 (8
1
/
2
× 14 , 8
1
/
2
× 11 ). The following table shows the results that can be
achieved when receiving with this machine.
• This function works only when all pages are of the same width and received into memory.
• This function cannot be used with Combine Two Originals.
• You can turn this function on or off using 2 Sided Print in the Facsimile Features menu. For details,
see “Reception Settings”.
• Printouts may vary depending on how the sender sets the originals.
• You can select to have documents only from selected senders printed in this way.
• Stored documents of the same size are printed on the same paper. Some stored documents may be
unavailable for this printing option.
• p.342 "Reception Settings"
Printing Options
213
To Next Page
Loading...
Need help?
General
