10. Allows you to set various features for transmission.
For details about setting the features, see “Other Transmission Features”.
11. Allows you to set a sender.
12. Allows you to check the number of “Transmission Standby File(s)”, “Memory Lock File(s)”, and “RX
Print Standby File(s)”.
For details about checking the status in [System Status], see “Checking the Memory Status”.
13. Displays Quick Operation keys set for frequently used functions. [TX File Status] and [RX File Status]
are preset.
For details about Quick Operation Key, see “General Settings”.
14. Displays the date, time, and machine status. Displays the name, facsimile number of the
destination, and the size of the original when transmitting.
When user authentication is set, a login user name appears.
15. Allows you to send or print the documents stored in the Document Server.
16. Allows you to select the file type.
17. Allows you to set scan settings and original feed types.
18. Displays messages and the machine status.
19. Title word keys appear. Allows you to switch from one page (display) to another on the destination
list.
20. Switches the type of title word keys.
For details, see “Switching the type of title in the Address Book”.
21. Appears on Destination keys programmed as a group destination.
• The display will differ depending on installed optional units.
• When the following settings are set to “On” in the Facsimile Features menu, transmission type tabs
are displayed. For details about these settings, see “Initial Settings”.
• (Internet Fax): When “Internet Fax Setting” is set to “On”.
• (E-mail): When “E-mail Setting” is set to “On”.
• (Folder): When “Folder Setting” is set to “On”.
• Information about documents sent using the facsimile function cannot be checked in [Job List]. Use
[Change TX / Info].
• p.102 "Switching the type of title in the Address Book"
• p.118 "Searching for a Destination in the Address Book"
• p.281 "Sending a Stored File"
• p.335 "General Settings"
20
To Next Page
Loading...
Need help?
General
