Ricoh SP 5200S User Manual

4. Press [Check / Change Settings].
5. Press [Add Destination].
6. Specify the destination using the number keys or Destination keys, and then press [OK].
Press the transmission type tab to switch the transmission type between fax/IP-Fax, Internet Fax, e-
mail, or folder.
If you specify a sender whose e-mail address is already registered, you can add Internet Fax
destinations and e-mail destinations.
You can add a folder destination only with Destination keys.
You can also program a SUB Code or SEP Code by pressing [Adv.Features].
7. Press [Exit].
Repeat from step 3, if you want to add another destination.
Changing the Settings of Files in Memory
227
4

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm