Ricoh SP 5200S User Manual

2. Enter “http://(IPv4 address, IPv6 address or host name of this machine)/” in the address
bar.
The top page of Web Image Monitor is displayed.
3. Click [Login], and then enter the Administrator's name and password.
4. Click [Address Book] in the left pane.
The Address Book is displayed.
5. Click [Add User].
The [Add User] page appears.
6. Enter the registration number, name, and e-mail address, then set the necessary
properties.
You can set the Internet Fax data format after entering the e-mail address.
7. Click [Full Mode] under [Internet Fax Data Format], and set the properties according to
the receiver's properties.
If you change the mode to “Simple Mode”, you cannot set machine properties.
8. Click [OK] at the upper or lower left of the screen.
To cancel the setting, click [Cancel] at the upper or lower left of the screen.
The Address Book is displayed.
9. Close the Web browser.
6. Fax via Computer
330
6

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm