4. Using the number keys or a Destination key, specify a destination.
If you make a mistake, press the [Clear/Stop] key, and then enter the correct number.
For details about specifying a destination, see “Specifying a Destination”.
5. Press the [Start] key.
The machine dials a destination.
• Documents are not stored in memory.
• p.66 "Scan Settings"
• p.78 "Specifying a Destination"
Sending originals using the exposure glass (Immediate Transmission)
This section explains how to send originals by Immediate Transmission using the exposure glass.
1. Press [Immed. TX].
2. Place the first page face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
The machine dials the destination.
6. Place the next original on the exposure glass within 10 seconds when you send multiple
originals, and then repeat steps 4 and 5.
Repeat this step for each page.
Transmission Modes
35
To Next Page
Loading...
