Ricoh SP 5200S - Special Senders to Treat Differently

2. E-mail address
3. Folder
4. IP-Fax destination
5. Fax number
Switch: 34, Bit: 0
Use gatekeeper with IP-Fax
• 0: Off
• 1: On
Switch: 34, Bit: 1
Use SIP server with IP-Fax
• 0: Off
• 1: On
Switch: 35, Bit: 7, 6, 5, 4, 3, 2, 1, 0
Redial interval when sending a backup file
• 00000000: 0 minute(s) 11111111: 255 minute(s)
Switch: 36, Bit: 7, 6, 5, 4, 3, 2, 1, 0
Maximum number of redials when sending a backup file
• 00000000/00000001: 1 time(s)
11111110/11111111: 254 time(s)
Switch: 37, Bit: 0
Whether to stop sending a backup file if the destination folder becomes full while the machine is
sending or waiting to send a fax or the backup file
• 0: No
• 1: Yes
Switch: 37, Bit: 3, 2
Specify whether or not the backup file is printed along with the TX communication failure report
when a backup file transmission failure occurs
• 00: Do not print
• 01: Print first page only
• 10: Print whole file
Switch: 37, Bit: 4
Display the sender's information in the file name of documents that are forwarded to folder
destinations
• 0: Off
• 1: On
Parameter Settings
383
7