Ricoh SP 5200S User Manual

3. Specify an End Receiver using the destination list, and then press [OK].
Press the transmission type tab to switch the destination between fax number, Internet Fax
destination, e-mail address, and folder destination.
IP-Fax destination appears in the fax destination list.
4. Press [Security].
If not specifying the security function, proceed to step 7.
Security is set to use S/MIME authentication. For details about the security settings, consult your
administrator.
5. Select the security functions.
7. Facsimile Features
392
7

Ricoh SP 5200S Specifications

General

Print Technology	Laser
Print Resolution	1200 x 600 dpi
Duplex Printing	Yes
ADF Capacity	50 sheets
Functions	Print, Copy, Scan, Fax
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Scanner Type	Flatbed, ADF
Connectivity	USB 2.0, Ethernet
Network Connectivity	Ethernet
Print Speed	Up to 47 ppm